Fish tacos thread of making!

Started by Mmm_fish_tacos, Nov 12, 2015, 04:03 AM

previous topic - next topic

0 Members and 1 Guest are viewing this topic.

Go Down

the-pi-guy

Jan 10, 2018, 05:30 PM Last Edit: Jan 10, 2018, 05:39 PM by the-pi-guy
Pretty much the only difference is that the buttons actually work. :P
I paid 6$ for this case.

The case is also smaller.  

darkknightkryta

Pretty much the only difference is that the buttons actually work. :P
I paid 6$ for this case.

The case is also smaller.  
Too small  >:(

the-pi-guy


darkknightkryta

So I'm shrinking my arcade stuff down.  Gonna use the Pico PSU.  So I got everything setup and Bam!  The picture is jumpy.  I think my AC-DC converter is too noisy.  I'm gonna order a new one from a PC store instead.  Gonna get a 12V 5A, should save me from having to fuse the wiring.

darkknightkryta



Almost done.

Mmm_fish_tacos

Nice , 3dprinted box?

Btw I made this recenrecently.

Mmmfishtacos (@chris_frieze) Tweeted: Here's my Akira bike by @3dworkbench #3Dprinted on my #prusa mk2s with makergeeks pla sliced with @Simplify3D. Hope you guys like it. #makers https://t.co/fytLQuatsY https://twitter.com/chris_frieze/status/1008150819563286529?s=17

darkknightkryta

Nice , 3dprinted box?
Yeah.  I printed the top on Friday.  I picked it up now.  I used a Chinese "supergun" from eBay for the screw terminals.  The only problem is that the card edge reader is way to tight.  I'm also iffy on my pico psu.  It's reading 5.07V.  It's within tolerance I'm just worried it will go higher so I might order one from the U.S.  Next will be making a case for my Jrok video encoder.

Go Up