Started by Mmm_fish_tacos, Nov 12, 2015, 04:03 AM
previous topic - next topic0 Members and 1 Guest are viewing this topic.
Pretty much the only difference is that the buttons actually work.Too small
I paid 6$ for this case.
The case is also smaller.
Here's my Akira bike by @3dworkbench #3Dprinted on my #prusa mk2s with makergeeks pla sliced with @Simplify3D. Hope you guys like it. #makers pic.twitter.com/fytLQuatsY
— Inspyre 3D (@chris_frieze) June 17, 2018
Nice , 3dprinted box?Yeah. I printed the top on Friday. I picked it up now. I used a Chinese "supergun" from eBay for the screw terminals. The only problem is that the card edge reader is way to tight. I'm also iffy on my pico psu. It's reading 5.07V. It's within tolerance I'm just worried it will go higher so I might order one from the U.S. Next will be making a case for my Jrok video encoder.
I'm getting supper hyped about this thing. It's coming along nicely. My workflow could use a bit of work. But it's working out. So I won't complain. Comments, Feedback, Questions? pic.twitter.com/bR2jcEbHJ1
— Inspyre 3D (@chris_frieze) August 20, 2018
Today update. I got the orb closer to what I had envisioned and reworked the hat it sits into a little bit to look better with the smaller orb. Next to work in some details and and hadel so you can hold the thing. The largest part is 195mm with a total of Build length of 380 pic.twitter.com/hvohIT8m8F
— Inspyre 3D (@chris_frieze) August 23, 2018
Hey guys, its been awhile but im still making. Ive been active on twitter. I've been working on a model i think will be pretty popular. Check it out and follow me on twitter.I don't use Twitter you woman!I'm getting supper hyped about this thing. It's coming along nicely. My workflow could use a bit of work. But it's working out. So I won't complain. Comments, Feedback, Questions? pic.twitter.com/bR2jcEbHJ1
— Inspyre 3D (@chris_frieze) August 20, 2018Today update. I got the orb closer to what I had envisioned and reworked the hat it sits into a little bit to look better with the smaller orb. Next to work in some details and and hadel so you can hold the thing. The largest part is 195mm with a total of Build length of 380 pic.twitter.com/hvohIT8m8F
— Inspyre 3D (@chris_frieze) August 23, 2018
I don't use Twitter you woman!Use twitter woman! It helps me out. I got about 3 years left at the job. Im trying to make a career switch!
On another note, I've been trying to mod my Fight Stick 3. I sort of cut out a new panel for it with plexi glass. I've been trying to shorten the actuator for the joystick since the case is too small and the stick is too big.
Use twitter woman! It helps me out. I got about 3 years left at the job. Im trying to make a career switch!Retiring or your contract?
Page created in 0.190 seconds with 26 queries.