My CPS3 board I bought is way smaller than I was expecting. I was hoping to put my supergun on top of it. Looks like it won't fit.
Started by Mmm_fish_tacos, Nov 12, 2015, 04:03 AM
previous topic - next topic0 Members and 1 Guest are viewing this topic.
Yeah I was planning to buy one of those power supplies and a switch. Well one of the power supplies at the electronic store that looks like that. I might stop by Happ. There's a Happ location near me, I was always curious to find out if it's just an office or a warehouse. Happ sells arcade parts. I was thinking of drilling a hole and then cutting with a saw like you suggested. I have to see if my dad still has that serated knife that he used for cutting wood and dry wall.If it's a normal drywal knife it isn't going to work. Got to your hardware store and see if you can find a thin fine tooth jig saw blade. That will work better.
If it's a normal drywal knife it isn't going to work. Got to your hardware store and see if you can find a thin fine tooth jig saw blade. That will work better.I don't want to use a jigsaw. I wanna cut it by hand.
I don't want to use a jigsaw. I wanna cut it by hand.you will cut it by hand. Just using a jigsaw blade.
Is there a holder for it?You might be able to find one. Or just wrap tape around the end.
Page created in 0.180 seconds with 22 queries.